Thermoplastic Road Marking Paint is a new generation highway marking system, preferred the world over, for its ease of usage and extended life cycle as compared to conventional solvent based paints. Thermoplastic paints are also environmentally more friendly with no carcinogenic solvents used.
Item Name: Bright-line - We are engaged on providing a wide range of Bright line Thermoplastic Paints, which is a retro reflective thermoplastic road marking paint. It is a synthetic resin based thermosetting material offering superior weathering resistance and color stability. The intermix and drop on glass beads ensure long lasting retro reflectivity. These are available in white and yellow color as per the clients’ specific requirements and have excellent wear resistance to ensure long life of the marking.
| S.No. | Content | Observation |
| 1 | Drying time | Less than 15 mint. |
| 2 | Softening Point °C | 110 |
| 3 | Luminance % | 80 |
| 4 | Skid resistance | 55 |
| 5 | Binder (% by wt.) | 18-20% |
| 6 | Tio2 (% by wt.) | 10.00% |
| 7 | Glass beads intermix (% by wt.) | 30.00% |
| 8 | Extenders | 3.00% |
| 9 | Fillers (% by wt.) | 37.00% |
- Paint Material Consumption in 1 Sq m = 4-5 kg
- Drop on Glass Beads Swarco/Potters Consumption in 1 Sq m = 250
- Specification: MOST 803 and H Spec
Scope of work :- Pre marking required for lane marking
- Application of road marking paint with machine, melt-or and skilled labors
- Normal cleaning of surface required prior to application of paint
- Name of the paint is “Bright-line”
Precautions :- Minimize dusting of the material during use
- Use of personal protective equipment like face-masks, goggles, heat resistant gloves and protective clothing while handling the material is recommended
- Do not inhale product or fumes, do not ingest
- Avoid eye contact. If contacted, wash copiously with water
- Contact of molten product with skin would lead to thermal burns
- Flush with cold water; do not remove material as it would lead to severe tissue damage
Application :- Add one bag of Bright line in per-heater and allow it to melt
- Keep on adding Bright line one bag at a time and allow it to melt before adding another bag, depending upon the capacity of pr-heater
- Do not allow temperature to rise beyond 210°C. Ideally Bright line shall be melted between 180 - 210 °C
- Mix Bright line with in-built motorized stirrer of per-heater for a few minutes at 180-210°C
Proper safety measures shall be taken to ensure smooth progress of work. 
